---DISCLAIMER---
Going online with modified save data will ALWAYS carry a ban risk, please be mindful of that!
The purpose of the dump file attached here is mainly for testing and research. I am not responsible of any issues that might arise by using the method/attachment, on both clean and hacked switches.
If you want to bring the villager you want to your clean switch, you can do so by doing local play with a CFW switch. This should be at a relatively low risk.
---MAKE SURE YOU PASTE THE EDITED SAVE FILES BACK TO AN EMPTY FOLDER!!! DO NOT OVERWRITE SAVE FILES, AS IT RESULTS IN SAVE CORRUPTION---
Hey Guys,
NHSE has been updated with a house editor, and below will be a quick tutorial on how to get correct villager + exterior/interior with dump files with the latest NHSE.
First inject the .nhv file through "Load Villager". Inject it in place of the villager you want to substitute out, or inject in an empty slot. Let's use Admiral.nhv as an example. Take note of the Villager Index #, this is important for later:
After that, go to "Edit House". You will see below view:
First, tap on "Load" and load Admiral.nhvh into where it says "Admiral's hourse"
(IMPORTANT) Make sure the NPC1 row has the same number as the one listed beside Villager Index!!! In this example, by editing the NPC1 value of the first plot in the list into 0 (same as Admiral's villager index) you have indicated that Admiral (#0) is living on this plot, for which you should have loaded Admiral's house dump prior to this step.
(You can skip the NPC1 check with the latest NHSE if you follow the revised steps: Load villager -> Save changes -> Load house in that villager's slot. By saving after loading .nhv, the house editor will recognize the plot# automatically and you can just inject the house dump by click on Load)
Save again and then you are done! Inject your save and profit!
Always make sure the villager index match the NPC1 in house editor for the same villager!! otherwise they will show up in messed up interiors ...
Attached is a batch of villagers with their correct houses for testing. Please let me know if any issues.
Villager Database updates:
-ALL VILLAGERS UPDATED! (except for the sanrio villagers)
-Re-dumped Spork to align with all US version names
Going online with modified save data will ALWAYS carry a ban risk, please be mindful of that!
The purpose of the dump file attached here is mainly for testing and research. I am not responsible of any issues that might arise by using the method/attachment, on both clean and hacked switches.
If you want to bring the villager you want to your clean switch, you can do so by doing local play with a CFW switch. This should be at a relatively low risk.
---MAKE SURE YOU PASTE THE EDITED SAVE FILES BACK TO AN EMPTY FOLDER!!! DO NOT OVERWRITE SAVE FILES, AS IT RESULTS IN SAVE CORRUPTION---
Hey Guys,
NHSE has been updated with a house editor, and below will be a quick tutorial on how to get correct villager + exterior/interior with dump files with the latest NHSE.
First inject the .nhv file through "Load Villager". Inject it in place of the villager you want to substitute out, or inject in an empty slot. Let's use Admiral.nhv as an example. Take note of the Villager Index #, this is important for later:
After that, go to "Edit House". You will see below view:
First, tap on "Load" and load Admiral.nhvh into where it says "Admiral's hourse"
(IMPORTANT) Make sure the NPC1 row has the same number as the one listed beside Villager Index!!! In this example, by editing the NPC1 value of the first plot in the list into 0 (same as Admiral's villager index) you have indicated that Admiral (#0) is living on this plot, for which you should have loaded Admiral's house dump prior to this step.
(You can skip the NPC1 check with the latest NHSE if you follow the revised steps: Load villager -> Save changes -> Load house in that villager's slot. By saving after loading .nhv, the house editor will recognize the plot# automatically and you can just inject the house dump by click on Load)
Save again and then you are done! Inject your save and profit!
Always make sure the villager index match the NPC1 in house editor for the same villager!! otherwise they will show up in messed up interiors ...
Attached is a batch of villagers with their correct houses for testing. Please let me know if any issues.
Villager Database updates:
-ALL VILLAGERS UPDATED! (except for the sanrio villagers)
-Re-dumped Spork to align with all US version names
